Within this realm, we carry grades that are Precolored, Glass Filled, Transparent, Flame Retardant, UL listed, FDA Approved, Automotive Approved, NSF Approved, USP Listed, along with many other listings and approvals.

By the nature of ABS and its inherent properties, it is very important to pick the correct material for the application. Things such as izod, impact strength, melt flow, yellow index of the natural material, colorability, and gloss levels are vital to understand about the material you wish to select. Our team of resin and technical experts can aide in guiding you through the selection process, helping you to find just the right ABS for you needs.

ABS is one of the unique materials in which the quality of the material available has come a long way in the last 20 years. In the past, our customers often felt that they had to stick with one of the domestic materials we supplied in order to get the quality that they needed for a tight tolerance job. This is no longer the case. With the rise of the Asian made ABS, and the intense research that they have poured into the field, the quality of the imported grades have matched or often times exceeded the quality of some of the domestics, and at a very reasonable price. If the opportunity to use an imported grade of materials are possible, please let us know, and we will advise you on some of your lower cost options.

Many of the higher end, compounded ABS’s are often made without the tight tolerances that are needed to ensure that the materials perform up to their mechanical specifications. To avoid any problems with our materials, we use twin screw technology and computer controlled compounding methods to ensure that your custom products are of the highest quality possible, and the lowest cost. What we do is to produce great ABS compounds at very reasonable prices. Get in touch with us, and let us show you what we can do.

TDL Plastics provides PEEK in all shapes and sizes. WE have PEEK billets, PEEK rods, PEEK shapes, and PEEK tubes. We can provide these in unfilled, carbon fiber or glass fiber filled grades.

Our extensive in stock, ready to ship inventory and market leading prices will make TDL Plastics your only choice for PEEK shapes.We also have the ability to produce any PEEK parts via our manufacturing process that you could want. This included PEEK seals, PEEK backup rings for the Oil and Gas Industry, and any other machined shape of PEEK that you might need.

PEEK (Polyetheretherketone) is one of the most chemical resistant materials on the market. Very high operating temperature range and harsh environmental conditions make PEEK the choice for the most demanding applications. The excellent machinability of PEEK offers the ease of processability that will allow you to machine the material in house or let TDL Plastics create the exact finished shape that you need.

We can provide materials that are UL V-0 rated, FDA approved, as well as other agency approved materials. We have very low friction bearing grade material.

Solutions in every single piece of PEEK.

TDL Plastics is a leading provider in the United States of POLYIMIDE (PI) in all shapes and sizes. We have POLYIMIDE (PI) sheets, POLYIMIDE (PI) billets, POLYIMIDE (PI) rods, POLYIMIDE (PI) shapes, and POLYIMIDE (PI) tubes.

We keep lots on the floor, ready to ship inventory and market leading prices will make TDL Plastics your only choice for POLYIMIDE (PI) shapes.

We also have the ability to produce any POLYIMIDE (PI) parts via our manufacturing process that you could want. This included POLYIMIDE (PI) seals, washers, valve seats, insulators and many other highly demanding applications where the high temperature profile is needed.

POLYIMIDE (PI), know widely by the trade names Imidex®, Meldin®, Plavis®, Sintimid®, and Vespel® has one of the highest operating temperatures of any plastic on the market. Very high operating temperature range (continuous use of up over 500 °F) and harsh environmental conditions make POLYIMIDE (PI) the choice for the most demanding applications. The excellent machinability of POLYIMIDE (PI) offers the ease of processability that will allow you to machine the material in house or let TDL Plastics create the exact finished shape that you need.

We can provide materials that are UL V-0 rated with operating temperatures well beyond the demand of most applications. POLYAMIDE (PI) is in a class by itself, and we are the best company to provide it for you.

Solutions in every single piece of POLYIMIDE (PI).

PBT Shapes

TDL Plastics provides PBT (polyester) in all shapes and sizes. We have PBT sheets, PBT billets, PBT rods, PBT shapes, and PBT tubes. We can provide these in unfilled, carbon fiber or glass fiber filled grades.

Our extensive in stock, ready to ship inventory and market leading prices will make TDL Plastics your only choice for PBT or any other polyester shapes.

We also have the ability to produce any PBT parts via our manufacturing process that you could want. This included PBT seals, PBT backup rings for the Oil and Gas Industry, and any other machined shape of PBT that you might need.

PBT (Polybutylene Teraphthalate) is very chemical resistant while maintaining a low cost. Many properties of PBT match up nicely with material costing twice at much. It is a hard material with a low coefficient of friction that allows it to go into many applications such as valves, cams, gears, pumps, bushing, bearings and all sorts of applications where performance is needed but cost is a consideration.

We can provide materials that are FDA, 3A Dairy, USDA, as well as other agency approved materials.

 Solutions in every single piece of PBT.

POLYETHERIMIDE (PEI) Shapes

TDL Plastics has POLYETHERIMIDE (often referred to simply as Ultem®) in all shapes and sizes. We carry regularly POLYETHERIMIDE (PEI) sheets, POLYETHERIMIDE (PEI) billets, POLYETHERIMIDE (PEI) rods, and other POLYETHERIMIDE (PEI) shapes. We can provide these in unfilled and standard glass fiber filled grades, usually in 10%, 20% or 30% fill levels.

Our extensive in stock, ready to ship inventory and short lead time specialty ordered material will make TDL Plastics your only choice for POLYETHERIMIDE (PEI) all of your shapes.

We can also machine any POLYETHERIMIDE (PEI) parts that you need. These parts come in a natural (honey) transparent color and black.

POLYETHERIMIDE (PEI) (Ultem®, Duratron®, Tempalux®) is a very high heat material that exhibits a natural flame retardancy and a low smoke character, coupled with good chemical resistance, which makes it a good choice in applications where smoke is an issue such as aerospace and confined marine space parts. The excellent machinability of POLYETHERIMIDE (PEI) offers the ease of processability that will allow you to machine the material in house or let TDL Plastics create the exact finished shape that you need.

We can provide materials that are UL V-0 rated and FDA approved materials which can withstand various types of sterilization procedures.

Solutions in every single piece of POLYETHERIMIDE (PEI).

POLYSULFONE (PSU) Shapes

TDL Plastics provides POLYSULFONE (PSU), also known Udul®, in all shapes and sizes. WE have POLYSULFONE (PSU) sheet, POLYSULFONE (PSU) billets, POLYSULFONE (PSU) rods, POLYSULFONE (PSU) shapes, and POLYSULFONE (PSU) tubes. We can provide these in FDA, USP Class VI, 3A-Dairy and NSF approved grades.

Our extensive in stock, ready to ship inventory and market leading prices will make TDL Plastics your only choice for POLYSULFONE (PSU) shapes.

We also have the ability to produce any POLYSULFONE (PSU) parts via our manufacturing process that you could want. This included POLYSULFONE (PSU) medical devices, POLYSULFONE (PSU) instrument pieces, and any other machined shape of POLYSULFONE (PSU) that you come up with. POLYSULFONE (Udel®) is very stable in very hot moist environments, and lends itself well to autoclaving application.

 Solutions in every single piece of POLYSULFONE (PSU).

TDL Plastics provides POLYAMIDEIMIDE (PAI), such as Torlon®, Duratron®, Semitron®, and Vespel® in all shapes and sizes. We have POLYAMIDEIMIDE (PAI) sheets, POLYAMIDEIMIDE (PAI) billets, POLYAMIDEIMIDE (PAI) rods, POLYAMIDEIMIDE (PAI) shapes, and POLYAMIDEIMIDE (PAI) tubes. We can provide these in unfilled, or with all sorts of exotic fillers to meet any design and engineering challenge that you might face.

 We keep most grades available, ready to ship, and have the experience necessary to get you just what you need, making TDL Plastics your only choice for POLYAMIDEIMIDE (PAI) shapes.

Manufacturing POLYAMIDEIMIDE (PAI) parts via our manufacturing process could be just what you need. This included PAI such as Semitron® which is static dissipative for any electronics application, POLYAMIDEIMIDE (PAI) parts for the Oil and Gas and Aerospace Industry, and any other machined shape of POLYAMIDEIMIDE (PAI) where very high temperature resistance is needed.

POLYAMIDEIMIDE (PAI) (Polyamideimide) is the best performing melt processable (not thermoset) material on the market. Very high operating temperature range and harsh environmental conditions make POLYAMIDEIMIDE (PAI) the choice for the most demanding applications. The basic properties exhibited by all POLYAMIDEIMIDE (PAI) materials are considered to be the best by any thermoplastic material. The very property of such a high working temperature makes this resin in a class all by itself.

We can provide materials that carry many agency approved materials. We have very low friction bearing grade material, glass and carbon filled material, as well as a lot of other exotic fillers to meet your most interesting project.

 Solutions in every single piece of POLYAMIDEIMIDE (PAI).

CYCLIC OLEFIN COPOLYMERS (COC) Shapes

TDL Plastics provides CYCLIC OLEFIN COPOLYMERS (COC) in all shapes and sizes. We have CYCLIC OLEFIN COPOLYMERS (COC) sheets, CYCLIC OLEFIN COPOLYMERS (COC) billets, CYCLIC OLEFIN COPOLYMERS (COC) rods, CYCLIC OLEFIN COPOLYMERS (COC) shapes, and CYCLIC OLEFIN COPOLYMERS (COC) tubes.

Our extensive in stock, ready to ship inventory and market leading prices will make TDL Plastics your only choice for CYCLIC OLEFIN COPOLYMERS (COC) shapes for your most demanding applications.

TDL Plastics can also produce any CYCLIC OLEFIN COPOLYMERS (COC) parts via our manufacturing process that you could want. This included CYCLIC OLEFIN COPOLYMERS (COC) lenses, CYCLIC OLEFIN COPOLYMERS (COC) packaging materials and optical lenses, and any other machined shape of CYCLIC OLEFIN COPOLYMERS (COC) that you might need.

CYCLIC OLEFIN COPOLYMERS (COC) (Cyclic Olefin Copolymer) is a very clear material much like PC and Acrylic, but with great physicals and higher dimensional stability. It has a higher heat resistance to both PMMA and PC with better chemical resistance. This makes CYCLIC OLEFIN COPOLYMERS (COC) the choice for the most demanding applications where clarity is needed. Let TDL Plastics create the exact finished shape that you need.

We can provide materials that are food contact approved in the US per FDA and Europe per EU Plastics Directive, as well as other agency approved materials. We also have UV transparent grades.

Solutions in every single piece of CYCLIC OLEFIN COPOLYMERS (COC).

POLYETHERIMIDE (PEI) Shapes

TDL Plastics has POLYETHERIMIDE (often referred to simply as Ultem®) in all shapes and sizes. We carry regularly POLYETHERIMIDE (PEI) sheets, POLYETHERIMIDE (PEI) billets, POLYETHERIMIDE (PEI) rods, and other POLYETHERIMIDE (PEI) shapes. We can provide these in unfilled and standard glass fiber filled grades, usually in 10%, 20% or 30% fill levels.

Our extensive in stock, ready to ship inventory and short lead time specialty ordered material will make TDL Plastics your only choice for POLYETHERIMIDE (PEI) all of your shapes.

We can also machine any POLYETHERIMIDE (PEI) parts that you need. These parts come in a natural (honey) transparent color and black.

POLYETHERIMIDE (PEI) (Ultem®, Duratron®, Tempalux®) is a very high heat material that exhibits a natural flame retardancy and a low smoke character, coupled with good chemical resistance, which makes it a good choice in applications where smoke is an issue such as aerospace and confined marine space parts. The excellent machinability of POLYETHERIMIDE (PEI) offers the ease of processability that will allow you to machine the material in house or let TDL Plastics create the exact finished shape that you need.

We can provide materials that are UL V-0 rated and FDA approved materials which can withstand various types of sterilization procedures.

Solutions in every single piece of POLYETHERIMIDE (PEI).

ETFE Shapes

TDL Plastics provides ETFE (Tefzel®) in all shapes and sizes. We have ETFE sheets, ETFE pieces, ETFE billets, ETFE rods, ETFE shapes, ETFE tubes, as well as ETFE film.

We keep a lot of ETFE around ready to ship. This and market leading prices will make TDL Plastics your only choice for ETFE shapes.

We also have the ability to produce any ETFE parts via our manufacturing process that you could want. This included ETFE seals for valves, bearings, ETFE for lining application, and any other machined shape of ETFE that you might need.

ETFE (Ethylene Tetrafluoro Ethylene) is fluropolymer material that has one of the most broad range of material properties possible. Very high and low operating temperature range and high chemical resistance and mechanical strength give ETFE the edge for the most demanding applications. The excellent machinability of ETFE offers the ease of processability that will allow you to machine the material in house or let TDL Plastics create the exact finished shape that you need.

We can provide materials that are UL V-0 rated with a 600 °F operating window. We also have material that comes with a fiber backing material so that it can be laid up for any tank or vessel lining need..

Solutions in every single piece of ETFE.